Technical & Reference Section > Tech and Restoration

dmr cranks

(1/2) > >>

stuntmaster:
how do i get the bearing off to get chainwheel off as the arm you see does not have bolt ie like two peice cranks .
 
anyone had a set of these

snav69:
Put it back in the frame and whack the spindle from the other side  :daumenhoch:

 :coolsmiley:

MartyC:

--- Quote from: snav69 on April 08, 2010, 08:01 AM ---Put it back in the frame and whack the spindle from the other side  :daumenhoch:

 :coolsmiley:

--- End quote ---

WHS^^^ +1

stuntmaster:
can`t do that as don`t have a frame with that size bb . i can see what you mean tho .

Dark Diggler:

--- Quote from: stuntmaster on April 08, 2010, 02:55 PM ---can`t do that as don`t have a frame with that size bb . i can see what you mean tho .

--- End quote ---

Rest the chain ring on a vice (covered with card) with the vice open enough for the crank arm only to fit through and whack the spindle end with a rubber mallet, the chainring and the bearings should come off together

Navigation

[0] Message Index

[#] Next page