Technical & Reference Section > Tech and Restoration

spraying tips

(1/2) > >>

rollin72:
im restoring a set of cranks and want some spraying tips, ive put 3/4 coats of primer on them and left to dry for 24 hours, they could do with another couple of coats, do i flat them now or after ive put the extra coats on and then again before the finishing coats of gloss, nice1 gaz :daumenhoch:

stidds:
Gaz


I would flat them now that they are dry and then again after the extra coats.  Also flat between the coats of finishing coats and clearcoat.

rollin72:
nice1 stidds :daumenhoch:

HEYWOOD BMX:
 :) And don`t rush `em to get them finished.Made this mistake with a set of forks last week and had to strip/start again.. :daumenhoch:

 Strip the forks that is,not get naked!

Tim38:
been on the cans myself for the 1st time this wknd some haro bars of the cheap mirra i got have had a repaint,sanded them down to raw bit of primer let it dry then gave it a light rub down, and a have put on a few coats of black they are looking much better,gave them a light spraying of primer,and used halfords black satin paint,ive got the bug for this now.

Navigation

[0] Message Index

[#] Next page