Technical & Reference Section > Tech and Restoration

need help removing bearings in BB

(1/3) > >>

bmxer123:
i dont know what type of BB i have, but im wanting to swap the BB from my old frame to my new frame :) the reason for this is because im gonna sell the bike on ebay and all i need to do is put the cranks, bearings and chain on. Any special way of doing it? i dont have any of the special tools required hence this topic. Thanks for reading! (Y)

sid1972:
pictures would be good - is it a one piece crank?  ;)

bmxer123:
aaaaaaaaaaaaaaaaahhhh sorry cant get pics up, i might put some on after i listed the bike (Y) i dno i think its a 3 peice crank and ive did my research and apparently theres a lock bolt or something :\ see i dont know much about the stuff im putting on because i bought the bike on ebay and the guy didnt know too much about it, but yea theres a lock bolt i think, and also the sprocket is still attached along with the spindle, however the cranks are off fine :D you got any idea? thanks! :D

subversion:
clutching at straws without a pic or 2 dude.....

antiquebmx:
mmmm  so youve got the crank arms off?   you need to take off the lock nut etc,  will need 2 big spanners.   unscrew all nuts from spindle, then take out.  then knock out bearings with hammer and screwdriver from inside through the other side. be careful not to damage anything!!

but im guessing with your description

Navigation

[0] Message Index

[#] Next page