Technical & Reference Section > Tech and Restoration

Profile Box Cranks Spacer - should there be any play?

(1/2) > >>

Kaner:
So I'm just installing these anniversary cranks into a TA and there is half a millimeter play on both sides of the crank arms. I have put 3 large spacers on the non-drive side and 1 large spacer on the drive side next to the spider.
Should there be any play, there is currently half a millimeter play on each side? Not sure if it will cause a problem or not?
I will put some photos up when I can.

Cheers Ben

Dark Diggler:
This might help dude, they are exactly the same in terms of the help guide  :daumenhoch:
http://www.profileracing.com/ht_crank_install.php

QUADROPHENIA:


tickler, i mean diggler is just so damn bloody helpful, i think hes great  :daumenhoch:

Bettyswallocks:
There shouldnt be any play, sounds like you need more spacers

You could wreck the splines if you ride with the arms loose

Bettyswallocks:
Might be wrong but did the cranks come with any cone spacers?

If not and its for a rider just get a hop up kit, comes with everything you'll need

http://www.alansbmx.com/product_info.php'manufacturers_id=47&products_id=2450

Shop around though cos that seems a bit steep

Navigation

[0] Message Index

[#] Next page