Technical & Reference Section > Tech and Restoration

bb info needed please

(1/2) > >>

motomagII:
just bought frame with euro bb on it .i have 3 piece but has got usa bb set on it can i get the euro bb set and still use this crank and spindle or are they totally different ?please .ps i dont know the axle size if this does make difference .cheers guys

Nosnod:
Should be fine
I bought a new set of dual pinch flites for my Cruiser and they came with both a Euro and US BB which utilised the same axle

silentpartner:
you should be able to use your existing cranks, it all depends on the spindle. if its a square tapered one most old school, and alot of new cranks will fit. it gets a bit more comlicated if your using splined or specialist spindeled cranks. if the cranks dont match the spindle you've got try alan woods, at alansbmx, he'll sort you out with what you need.

alan  ;)

motomagII:
the cranks are nwe school and not very good quality they are only db ones the axle is splined too

hutchboy:
unless its an oversized spindle then a 19mm euro bb should be ok on that

Navigation

[0] Message Index

[#] Next page