Technical & Reference Section > Tech and Restoration

seat post help

(1/4) > >>

pickle:
Got a 90's assassin frame and it measures 22.2 across the seat tube hole, but when i put the 22.2 post in it's like a cock up an alley way and won't tighten


any help?  does it require a special size?  Jai.....any advice?  :daumenhoch:

R Al:
Both mine took a 22.2, try the seatclamp the other way round as the split is at the front

HUTCHMAN:
I had to use a larger size in my Assassin,possibily 22.6

pickle:

--- Quote from: R Al on June 29, 2010, 06:50 PM ---Both mine took a 22.2, try the seatclamp the other way round as the split is at the front

--- End quote ---

tried it the other way but A. didn't like the look and B. it would pinch the frame tube to tighten it that much so was not the correct size post.

so you can get 22.6 then  ???

HUTCHMAN:
i think it was something like 22.6(it was a Hutch Hi-caliber post that would'nt fit ANY Hutch frames i've got)and you could see the slight taper where the seat guts clamped on,so the majority of the post was obviously larger diameter.

Navigation

[0] Message Index

[#] Next page