Technical & Reference Section > Tech and Restoration

Getting this razzer facking spider off...

<< < (2/4) > >>

meticulous:
thems are what i meant.... :crazy2:

CD17:
Or even easier, put it in a vice & turn use the crank arm against it, that way you have two hands to use to turn it  :daumenhoch:

Plinth Adenoid:
Cheers guys, I'm off to Wickes in the morning :)

Thanks all for your advice, what a great site. I'm off to the supporter page to join in :)

Rodgy1970:
be careful not to batter the that PPP powerdisc, it should strip and polish up loverly, nice bit of kit that   :daumenhoch:

animal:
Put 2 blocks of wood in a vice , then clamp the power disc in between them nice and tight . Then tape the end of a large screwdriver up with insulation tape so doesn't damage the disc. Then using the screwdriver as a drift in the notch on the retaining bolt , hammer the screwdriver against the retaining nut nice and sharply anticlockwise till it comes loose  ;)

Navigation

[0] Message Index

[#] Next page

[*] Previous page