Technical & Reference Section > Tech and Restoration

Seat post diameter

(1/2) > >>

Macmania:
Just to check will a seat post described as 13/16" in diameter fit a standard 22.2mm tube or will I definitely need a shim ? Thanks in advance  :daumenhoch: Nath

NORTY40:
You will need a shim Nath  ;)

13/16 is about 20.6mm  :daumenhoch:

Macmania:

--- Quote from: NORTY40 on October 14, 2010, 07:50 PM ---You will need a shim Nath  ;)

13/16 is about 20.6mm  :daumenhoch:

--- End quote ---

Ta Joff, thought so  ;) Good job i've got one then  :D

NORTY40:

--- Quote from: macmania on October 14, 2010, 07:52 PM ---
--- Quote from: NORTY40 on October 14, 2010, 07:50 PM ---You will need a shim Nath  ;)

13/16 is about 20.6mm  :daumenhoch:

--- End quote ---

Ta Joff, thought so  ;) Good job i've got one then  :D



--- End quote ---

If you haven't , there's one here  http://cgi.ebay.co.uk/Wald-905-Stem-Seat-Post-Reducer-Shim-13-16-7-8-/190358267923?pt=Cycling_Parts_Accessories&hash=item2c523ca813

Macmania:

--- Quote from: NORTY40 on October 14, 2010, 07:55 PM ---
--- Quote from: macmania on October 14, 2010, 07:52 PM ---
--- Quote from: NORTY40 on October 14, 2010, 07:50 PM ---You will need a shim Nath  ;)

13/16 is about 20.6mm  :daumenhoch:

--- End quote ---

Ta Joff, thought so  ;) Good job i've got one then  :D



--- End quote ---

If you haven't , there's one here  http://cgi.ebay.co.uk/Wald-905-Stem-Seat-Post-Reducer-Shim-13-16-7-8-/190358267923?pt=Cycling_Parts_Accessories&hash=item2c523ca813

--- End quote ---

Ohh no.................not Porkchopzz again, he will think i'm stalking him  ;D

Navigation

[0] Message Index

[#] Next page