Technical & Reference Section > Tech and Restoration

Pulling GT Cranks

(1/2) > >>

Dan73:
Evening,

I got a 1995 GT Speed Series Cruiser recently, and I'm just taking it apart for a clean up and to send the cranks for a re-chrome.

CAn anyone tell me how to pull the cranks. They're three piece, and I have a tool that Ive used on various mountain and road bikes, but it relies on the inside of the crank arm being threaded.

The cranks on the GT dont have a thread.

If I'm not making myself understood, I'll try and get some pics up in the morning.

Any help appreciated.

Dan

HUTCHMAN:
do you have any pics?

HEYWOOD BMX:
 :) Can you lay your hands on a Profile type tool? They screw into the spindle instead of the arm,maybe someone on here can lend you one.. :daumenhoch: 

Gashead:
The last time I pulled, I used a Babycham  :daumenhoch:

john4130:
if their like profile cranks take the non drive side bolt out and then tighten the drive side bolt, it might move it enough to remove the rest by hand.

Navigation

[0] Message Index

[#] Next page