Author Topic: Found an old photo (Read 6145 times)

MartyC · « **Reply #25 on:** March 21, 2011, 01:42 PM »

Quote from: JOO on March 20, 2011, 11:11 PM

I heard if you fill the toptube with water and plug it and put it in the freezer it can push the dents out so here we go........

monkian · « **Reply #26 on:** March 21, 2011, 03:42 PM »

Quote from: JOO on March 20, 2011, 11:11 PM

I heard if you fill the toptube with water and plug it and put it in the freezer it can push the dents out so here we go........

JOO · « **Reply #27 on:** March 21, 2011, 09:30 PM »

Well after a couple of goes in the freezer and nothing happened i decided to try another method. I drilled a hole in the tube opposite one of the big dents to see if i could tap the dent out from the inside which worked a bit but not enough to do it on all the dents....

JOO · « **Reply #28 on:** March 23, 2011, 02:15 PM »

Sod it!! It's going to have to be white! Right first go at filling anything....

JOO · « **Reply #29 on:** March 23, 2011, 02:26 PM »

Jamroll · « **Reply #30 on:** March 23, 2011, 03:59 PM »

Fook me Joo you have been a busy boy

Quality Resto there mate, Job well done

Judging by the speed you got that little lot done, you'll have it built by the end of the day

The Burner King · « **Reply #31 on:** March 24, 2011, 08:03 PM »

That looks amazing fella

, you can always get a chrome one at a later date

JOO · « **Reply #32 on:** March 24, 2011, 08:10 PM »

Thanks

waza04 · « **Reply #33 on:** March 24, 2011, 08:14 PM »

that looks sweet...... you could have took it to a body shop, and they may have been able to pull those dents out, with those spot welder rivet thingies and a slide hammer!

JOO · « **Reply #34 on:** March 24, 2011, 08:25 PM »

I know yep but i enjoy doing resto bits myself

rick1970 · « **Reply #35 on:** March 24, 2011, 08:25 PM »

Quote from: rick1970 on March 12, 2011, 09:19 PM

Quote from: rooski on March 12, 2011, 08:50 PM
that looks nasty Joo
needs filling with lead or braze
fookin gutted for yer ,not the end of the world get it filled and powdered coated and build tribute sister bike

mate that looks awsome well done

JOO · « **Reply #36 on:** March 24, 2011, 09:09 PM »

Got some more bits today prob going to put the uni seat on to start with then change it for the red flight tech...

And got some white tuffs soaking in bleach...

rick1970 · « **Reply #37 on:** March 24, 2011, 09:22 PM »

will this be a rider then ?? i would

hunterdubber · « **Reply #38 on:** March 24, 2011, 09:36 PM »

I'm a bit of a chrome addict when it comes to frames

but T/A's look the mutts in white

As for what CW bars are on yours I'd definatelt agree with Andy (Delray),, those look like expert 8" rise as opposed to the 9" pro's
I've had 2 expert and 3 pro size sets of CW's and they're easy to tell apart

Good luck with the build , so far so very good

monkian · « **Reply #39 on:** March 24, 2011, 09:43 PM »

Looking good

JOO · « **Reply #40 on:** March 24, 2011, 10:07 PM »

Yes it`s going to be a rider, i got some cw bars off here the other night i was in such a rush to get them i didn`t ask what size they where i hope they are expert i`ve just pm the guy now to find out....

JOO · « **Reply #41 on:** March 24, 2011, 10:17 PM »

These are the bars can you tell from that what size they are.

..

dordymush · « **Reply #42 on:** March 24, 2011, 10:20 PM »

are they cw bars

.
welds look a bit thick or is it my eyes lol.

did you buy the T/A off here by the way.

JOO · « **Reply #43 on:** March 24, 2011, 10:26 PM »

He says that thay are but someone on here said the knurling wasn`t right so i dont know yet and yes i got ta f&f off here

bobafett · « **Reply #44 on:** March 24, 2011, 10:27 PM »

Enjoying this build thread mate - shame you couldn't have it chrome but it looks sweet in white

JOO · « **Reply #45 on:** March 24, 2011, 10:31 PM »

Thanks

dordymush · « **Reply #46 on:** March 24, 2011, 10:37 PM »

you should be able to tell if they c dubs with nice welds and criss cross knurling on the stem area.

i take it the damage was'nt mentioned to you when you bought the T/A .
bad that is.

hunterdubber · « **Reply #47 on:** March 24, 2011, 10:42 PM »

Quote from: dordymush on March 24, 2011, 10:37 PM

you should be able to tell if they c dubs with nice welds and criss cross knurling on the stem area.

i take it the damage was'nt mentioned to you when you bought the T/A .
bad that is.

Beat me to it Dave

Criss cross knurling = CW's

Those don't look genuine from the upsweep angle from the stem area ( too square )

Mind you they weren't CW money , so no probs there

JOO · « **Reply #48 on:** April 25, 2011, 10:34 PM »

Managed to get a chrome TA it just needed a polish and new decals

JOO · « **Reply #49 on:** April 25, 2011, 10:39 PM »

Spayed Mr Muscle onto the black headset that came with the F&F

polished them and put red decals on

Author Topic: Found an old photo (Read 6145 times)

monkian

JOO

JOO

JOO

The Burner King

JOO

waza04

JOO

JOO

monkian

JOO

JOO

JOO

JOO

JOO

JOO