Technical & Reference Section > Tech and Restoration

replacing shimano dx pedal pins

(1/1)

firebird4130:
Anyone know a good way of doing this? How to remove old ones,Where to get new ones from etc
Cheers  :daumenhoch:

Fraz

Chinadog:
If they won't pull out then you have to drill them out.

start off with the smallest drill bit you have working up to one thats slightly smaller than the pin. once you've done that they should come out with a bit of wiggling/twisting.
It sounds easyer than it is unless you have a pillar drill, but it is possible with a normal drill and top quality drill bits if you take your time.

I couldn't find replacement pins for sale anywhere but found vp dx style pedals (vp555) have the same size pins fitted and cost about £6-7 on ebay so i got some of those and cut the pedals off the pins if you know what i mean. ;)   

BENDYCAT ELEVENTEEN:
pictures people, pictures  :coolsmiley:

MartyC:
f you use the search function you should find a Steve P post on how to replace the pins and a suggestion on what to use in place  :daumenhoch:

firebird4130:
awesome, will give that a go,

Cheers  :daumenhoch:

Navigation

[0] Message Index