Technical & Reference Section > Tech and Restoration
A bit of help / advice needed please
kuwahero:
I didn't use either of the cone spacers on mine. I just used the different sized thin spacers to space them correctly.
My crank arms miss the frame by around 5-6mm. just play about with the spacer and try keeping as close as you can to bb
p.s. if you put the top hat on the outside there will be a gap between the powedisc and the crank arm mount. when you then tighten the sprocket bolt it will deform the power disc.
john4130:
--- Quote from: kuwahero on July 23, 2011, 12:08 AM ---I didn't use either of the cone spacers on mine. I just used the different sized thin spacers to space them correctly.
My crank arms miss the frame by around 5-6mm. just play about with the spacer and try keeping as close as you can to bb
p.s. if you put the top hat on the outside there will be a gap between the powedisc and the crank arm mount. when you then tighten the sprocket bolt it will deform the power disc.
--- End quote ---
do what kuwahero says and remove the black spacer and use thin shims if needed. then add washers to the back axle whichever side needs them to get correct chain alignment. dont put the tophat on the other side of the chainwheel as it will bend ure chainwheel when you tighten it down.
pickle:
maybe you'll have to ditch the power disc and go for a normal spider, that way you can mount the chainring on the back side of it and it will line up better ???
Jamroll:
Sorry for not getting back sooner, tried all this last night was tired and finished up chipping my paint :-[ had a smoke calmed down after swearing loudly for 10 mins and went to bed feelin sorry for myself ;D
Anyway, Had a look again this morning before work and I think Kuwahero's suggestion is the right one, I tried putting the tophat washer on the out side and as a lot of you have said all it did was "twist" the powerdisc and chainwheel. So have removed the cap on the driveside and all seems to look ok, so will have another crack when the baby goes night night tonight and the mrs goes out.
Thanks for all the suggestions lads...really is appreciated :daumenhoch:
Oh Bendy, let me know when you wanna come over and I'll bring it in 8)
Al
BENDYCAT ELEVENTEEN:
will nail varnis hide the chip ? will let you know mate when i will pop over :daumenhoch:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version