Technical & Reference Section > Tech and Restoration

Gyro question, is it just me or.....

(1/2) > >>

WINI:
Got my Oddy2 gyro set up, but its utterly useless as a stopping tool.  I quite expected this as more parts = more friction = less effective brake, but I was hoping I would be wrong.

Are there any tips or tricks on how this can work well and actually stop me compared to a regular back brake set up?

Cheers  :daumenhoch:

WINI:

--- Quote from: Glen on September 24, 2011, 06:01 PM ---Did you lube the cables?  If not, thats the problem

--- End quote ---

I didn't Glen, straight outta the box.  Did you just drop some lube down the inner cables as they are fixed in no?

What did you find works best? 

Cheers fella

WINI:

--- Quote from: Glen on September 24, 2011, 07:11 PM ---Yes, lube it all!  I use silicone based spray lube.  Grease the springs and the mounts too.

--- End quote ---

Sweet, will do.  Thanks for the advice  :daumenhoch:

rick1970:
3 in 1 oil  back in day, or sewing machine oil  :daumenhoch:

super mat:
when i set up the spin tech on my decade i used brand new linear cables.utterly useless until  i used 3in1 all over the moving parts.it now works perfectly.

Navigation

[0] Message Index

[#] Next page