Technical & Reference Section > Tech and Restoration

seat post stuck in the frame tube

<< < (2/2)

super mat:
i removed a mk1 burner post by first of all soaking in plus gas down the seat tube(also thriugh the bb if you can access it).i then drilled a 10mm hole through the post .i then inserted a bar through the hole so that there was no play.i then give the post a few taps from the top with hammer and then used the bar to turn the post out.i think i read this somewhere on here.this might not work all the time but it certainly worked for me.no caustic nor heat required.

Spartacus:
Use a slide hammer.

Navigation

[0] Message Index

[*] Previous page