Technical & Reference Section > Tech and Restoration

Spoke Length Z rims to Suzue low flange

(1/1)

brettypeeps:
I am about to embark on a wheel build for Dan but am not a 100% on spoke length for a lace 4.  I would say 194mm with long nipple as per building a set of 7x's will that be a good length

Thanks in advance :daumenhoch:

Brett

steve69:
I'm thinking 188's   :-\

i've not done 4x, but the 3x, z-rim to low flange i done a while ago was 184's with long nipples.

brettypeeps:

--- Quote from: Londonhellboy ---Always use 194mm for low flange hubs with a X3 pattern. 184 - 186mm for High flange hubs with a X3 pattern 

If you want to use a X4 pattern, you will need around 196mm dude but you can stretch them easily if you have 15mm nipples 


--- End quote ---

steve69:

--- Quote from: brettypeeps on October 22, 2011, 01:42 PM ---
--- Quote from: Londonhellboy ---Always use 194mm for low flange hubs with a X3 pattern. 184 - 186mm for High flange hubs with a X3 pattern 

If you want to use a X4 pattern, you will need around 196mm dude but you can stretch them easily if you have 15mm nipples 


--- End quote ---

--- End quote ---
I would agree if you were lacing Araya 7X style rims, but a Z-rim has a raised centre so you will need shorter spokes.

I've got a log of rim/hub/nipple/spokes sizes and lengths that i've been keeping as i have been building wheels and as said i've not built that combo yet so i can't say for sure.

I have built...

z-rim/lf 3x=181's,
z-rim/sf 3x=184's,
z-rim/bullseye 3x=184's,
z-rim/phil wood 3x=184's,
7x/lf 3x=184's,
7x/sf 4x=194's,
7x/bullseye 4x=194's,
20x1-3/8"/lf 2x=194's

So i think 196's will be way too long :-\

Navigation

[0] Message Index