Technical & Reference Section > Tech and Restoration

Shinesiding

(1/2) > >>

TELLIS302000:
Anyone on here is is VERY competent at shine siding rims?

 :daumenhoch:

meticulous:
it really is a DIY job if you have a bit of soapy water and some 400 wet n dry... ;)

animal:
I work through the grades down 2 2500 grit wet . Then a quick buff they r sorted  ;) Makes ur fingers hurt tho  :2funny:

TELLIS302000:
Might give it a try then.

Just dont wanna knack em up like by going onto the inside of the rim!

animal:
Make sure u use a wooden block and fold the paper round it  ;) that way u don't slip over the edges  :daumenhoch: Loads of walm water with washing up liquid in it and a sponge 2 wipe off the muck

Navigation

[0] Message Index

[#] Next page