Technical & Reference Section > Tech and Restoration

Seat lettering removal?

(1/4) > >>

Torker pro-x:
Best way to remove the gold print off a seat without scratching the plastic? Cheers guys Im guessing some sort of paint/varnish remover??  :daumenhoch:

Munnyella:
Try a good, strong adhesive tape, stick it on, give it a good rub/burnish, peel away and it may come off, it did when I removed some patchy printed lightning bolts anyway, don't leave it too long, otherwise you'll end up using spirit of some kind to remove the sticky stuff, which is what you want to avoid.

MM

ED209:
Markys method is best but Cellulose thinners will do it ... BUT try it under the seat first to see what it does  :daumenhoch:
i.e. it might melt the plastic or take the finish off with the lettering  :buck2:

Torker pro-x:
Ok thanks for the replys  :daumenhoch:

motomagII:
also zippo ligther fluid dissolved adhesive so soak the lettering in theis leave for few mins do couple times till you can get finger nail on edge and lift it tad pour bit more lighter fluid into it and leave for 30 seconds or so and pull hey presto they eppl off nicely.
ps :del showed me this so it aint my idea but it works a treat on any sticker ive removed so far

Navigation

[0] Message Index

[#] Next page