Technical & Reference Section > Tech and Restoration

Aero zytec sealed bearing question.....

(1/2) > >>

The Burner King:
Don't know if anyone has tried this, but is it possible to change the bearings in the hubs of aero zytecs?

They are sealed ones, but inside the bearings are open. I know you can buy sealed bearings but they are normally closed both sides? Could you use a set of that type to replace the zytec ones. The rear bearings in mine sound a bit rough, they look OK and i've greased them but they just don't sound right.

I don't even know what size to get so if anyone can help please let me know.

Cheers J

BENDYCAT ELEVENTEEN:
Got a pic Julian mate - might have some thing that might work or might not  ??? ;D


cheers B  ;)

john4130:
you could knock them out to see if there's a number on them, then see if a bearings supplier has them or measure the outside o.d, inside o.d and width and check that way.

The Burner King:

--- Quote from: john4130 on April 06, 2012, 12:27 AM ---you could knock them out to see if there's a number on them, then see if a bearings supplier has them or measure the outside o.d, inside o.d and width and check that way.

--- End quote ---

Gonna stick one half of the hub in the oven tonight and take the bearings out, they come out easy once heated up.

The Burner King:

--- Quote from: BENDYCAT ELEVENTEEN on April 06, 2012, 12:26 AM ---Got a pic Julian mate - might have some thing that might work or might not  ??? ;D


cheers B  ;)

--- End quote ---

What you got then B?

Navigation

[0] Message Index

[#] Next page