Technical & Reference Section > Tech and Restoration
This resto's not one for the purist's....look away now!! (pic heavy)
ozone:
--- Quote from: Bob_Acid on April 15, 2012, 07:25 PM ---This man does not have a clue.....
And he's a bellend 8)
--- End quote ---
Just imagine what the op could create if you let him loose on all of those bike armed with a grinder and some aerospace glue. :shocked:
spesh:
well done fella for doing this i would have done the same as i like to polish the hubs and get them straight and the only way was to cut them out then fair doo,s :daumenhoch:
and dont forget the axle cones and nuts hold the flanges together not the rivets they just stop the hub turning in the wheel so the glue just keeps them in place id ride on em no probs :daumenhoch:
Chromo Buzz:
--- Quote from: Bob_Acid on April 15, 2012, 07:25 PM ---This man does not have a clue.....
And he's a bell end
--- End quote ---
I'm not dissing his abilitie's at resto work as judging by the pic's you posted they are 1st class :daumenhoch:
But when it come's to adhesive's then yes......he is a bell end. To come out with comment's that i now have 2 pair's of un-rideable wheel's is unbelieveable :idiot2:
The original shagged pair were un-rideable, some people need to get out a bit more & not take this too seriously.
Buz ;)
Chromo Buzz:
--- Quote from: spesh on April 15, 2012, 08:38 PM ---well done fella for doing this i would have done the same as i like to polish the hubs and get them straight and the only way was to cut them out then fair doo,s :daumenhoch:
and dont forget the axle cones and nuts hold the flanges together not the rivets they just stop the hub turning in the wheel so the glue just keeps them in place id ride on em no probs :daumenhoch:
--- End quote ---
Thank's bud for the vote of confidence, much appreciated :daumenhoch:
Buz ;)
MartyC:
--- Quote from: oldskoolbuz on April 15, 2012, 09:15 PM ---
--- Quote from: Bob_Acid on April 15, 2012, 07:25 PM ---This man does not have a clue.....
And he's a bell end
--- End quote ---
I'm not dissing his abilitie's at resto work as judging by the pic's you posted they are 1st class :daumenhoch:
But when it come's to adhesive's then yes......he is a bell end. To come out with comment's that i now have 2 pair's of un-rideable wheel's is unbelieveable :idiot2:
The original shagged pair were un-rideable, some people need to get out a bit more & not take this too seriously.
Buz ;)
--- End quote ---
Perhaps you should practice what you preach? I find you to be very rude in almost every response to some who did not appreciate your reasoning or opinion on the matter :idiot2:.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version