Technical & Reference Section > Tech and Restoration

86 Street Beat Top Tube

<< < (2/3) > >>

BENDYCAT ELEVENTEEN:
you can also dye the clear/white cable ties to match the other parts on the bike - this way you don't have to used the new solid colours that can some times look out of place, or look too NS style  ;)

Devilock:
Yeah, just to be sure Ive tried it with a DC one & it doesn't fit...!

Glynnyboy:

--- Quote from: mothwasp on April 16, 2012, 09:54 AM ---Yeah, just to be sure Ive tried it with a DC one & it doesn't fit...!

--- End quote ---
Was it a 31.8  i know a lot of osbmx are 28.6 and the earlier ones are the smaller size?

I know the TA takes the 31.8  size and has to be manipulated into shape a little to fit the teardrop.
Not sure if the streetbeat tt is the same thickness as a TA or if it is you could manipulate the clip enough without snapping it?

Deano:
I tried a few on my pair of beats and none i got fit nicely so i used colour matching vercro straps as the cable ties dig into the paint when fastened tight. Also iv slashed the inside of my thigh on the end where i cut the excess cable tie off  :LolLolLolLol:

Devilock:

--- Quote from: Deano on April 19, 2012, 03:17 PM ---I tried a few on my pair of beats and none i got fit nicely so i used colour matching vercro straps as the cable ties dig into the paint when fastened tight. Also iv slashed the inside of my thigh on the end where i cut the excess cable tie off  :LolLolLolLol:



--- End quote ---

Always cut off the excess with nail clippers... :daumenhoch:

Navigation

[0] Message Index

[#] Next page

[*] Previous page