Technical & Reference Section > Tech and Restoration

Bottom bracket

(1/2) > >>

Goonio:
Evening -
Anyone got any tips on how this bottom bracket comes apart - there are no spanner opportunities on either side
Bike is a Standard byke 250

Jaypeg:
I don't have much luck when it cones to giving advice.. But it looks like you should take the spacers off and knock the spindle out(I use a plastic hammer to knock mine in). Then you are left with your cups to just knock out. You could take it to a bike shop and get them to do it, they could press a new one in as well. Might be best to see what the experts on here say but that's what I would do. I always find an old seat post useful for knocking out cups. Good luck...

Betty:
Hammer and socket set extension bar  :daumenhoch:

Let's have a look at the old Standard   8)

TwoBobRob:
What he said ^^^^^^

Pop those washers off and knock the axle through, then go at the bearings from t'other side with a suitable drift (socket extension if you don't have a long punch). The bearing and it's cup will come out as one.

Goonio:
Thanks for the advice all I'll have a go at that tonight

Navigation

[0] Message Index

[#] Next page