BMX General > BMX Chat

BITD Good And Bad Frames n' Parts You & Mates Demolished...

<< < (3/4) > >>

Peter J:
Pro Class Rims - Flat spotted quite a few

Renthal Bars - One set bent another snapped

SR Cranks - Cracked

Renthal Lay Back - Bent

Ripper - Seat tube snapped and bent rear stays

MKS Graphs - Snapped

MX3's - Snapped loads after falling off

OPC's - Bent

Helmet - Cracked a few  :crazy2:

Skyway TA - Cracked fork dropout's

The only bike I had that I couldn’t break was my last racer Pro Class  :smitten:

OrgasmDonor:
GHP Frame DT snap
suntours stems x2 bent
robbo pro bars bent
endless 1pc sugino n takagi bent (altho takagi 180s remained my crank of choice  :daumenhoch:)
401s bent
i could also never get mx1000s to work as well as the earlier 1080s? 90s? cant remember which was the size but they worked much better than 1000s and the extra flex was quite nice  :daumenhoch:

on the flip side
GHP Forks, tufneck square corner stem, dc tech 3, elina LB, GT layback n suntour beartraps all saw me out, awesome products  :daumenhoch:
also gotta mention i had a 1.75 comp2 on the front n a 1.75 grippa on rear, those tyres lasted me about 2 years :daumenhoch:

deeman:
Bent a Takagi OPC,that was about it!mostly did flatland as a kid! :daumenhoch:

Spen69:
Utterly demolished a rear Tuff2 when imiss-judged the height of a set of steps I bunny-hopped up and snapped my chain and removed a lot of the chrome on my rear drop-outs at the same time.

Never damaged my Mongoose Cali frameset despite all the accidents I had...... But certainly sacrificed a lot of skin to the BMX gods and still do now!

neil:
Only ever broke an acs stem it snapped clean in half!
Other than that nothing due to my smooth riding :daumenhoch:

Navigation

[0] Message Index

[#] Next page

[*] Previous page