Technical & Reference Section > Tech and Restoration

BB QUESTION

<< < (2/3) > >>

Funkyworm:

--- Quote from: munnyella on March 29, 2013, 08:23 AM ---You won't have any `adjustability' with your set up, it'll either work or it won't. there are different spindle lengths available for different chain alignment.

You'll see what I mean once you chuck it on the bike.

Should be fine though.

MM

--- End quote ---

Ah oh cool, well ill be polishing up the crank arms & hopefully fitting sometime in the next few days so I'll let ya know. Cheers for the advice guys !  :daumenhoch: :daumenhoch: :daumenhoch:

HEYWOOD BMX:
 :) The new sealed Redline Flight BBs are 19mm and your spindle is prob 23.8 mm (Same as a 1pc crank) so prob not compatible.

Funkyworm:

--- Quote from: VOIVOD on March 29, 2013, 01:48 PM --- :) The new sealed Redline Flight BBs are 19mm and your spindle is prob 23.8 mm (Same as a 1pc crank) so prob not compatible.

--- End quote ---

Hi,  Im not fitting a redline BB,  i said thats what i'm (used) to fitting as thats the only 3pc style crankset i've ever fitted before.

 The BB set i'm fitting this time is the one in the previous picture it was advertised as compatible with a Sugino CT & GT crank & as i'm fitting at Sugino GT i assumed this would be the right one (picture above).

I now have the BB on & have fitted the crank arms to the spindle but surely the spindle is too long as surely there should not be this much of a gap between the crank arms & the frame ??

Any suggestions welcome ????????

KANG:
That does look a tad long..

HEYWOOD BMX:
 :) My error.I`ve had the same problem when fitting Sugino square taper spindles.Can`t find mine to measure it :(

Navigation

[0] Message Index

[#] Next page

[*] Previous page