Technical & Reference Section > Tech and Restoration

stuck stem bolt

<< < (2/3) > >>

oldschoolace:
Put the other bolt back in and tighten it up slightly tighter than the stuck bolt. Assuming you have soaked it in wd40 etc then try and tap a flat screwdriver into the bolt head whilst applying a slight anticlockwise twist to the screwdriver.

Failing that you could try one of those screw extractor gismo's  :daumenhoch:

bobbbbsy:
cut a screwy groove in both ends then chop in the gap . try and unscrew ? what tools you got ? or take it somewhere with a good pillar drill

kev-s:
soak the bolt in wd40 then get a allen key bit or torx bit (socket set or screwdriver type ones) that is slightly bigger than the bolt and hammer it in and then unscrew it with the socket bar or screwdriver :daumenhoch:

Betty:

--- Quote from: kev s on May 30, 2013, 11:21 PM ---soak the bolt in wd40 then get a allen key bit or torx bit (socket set or screwdriver type ones) that is slightly bigger than the bolt and hammer it in and then unscrew it with the socket bar or screwdriver :daumenhoch:

--- End quote ---

This

gary4130:
cheers guys will give it a go this weekend + let you know  :daumenhoch:

Navigation

[0] Message Index

[#] Next page

[*] Previous page