Technical & Reference Section > Tech and Restoration

spoke advice

(1/2) > >>

winnit93:
ive got these gt hubs that im useing on my next build

the rims im useing are nos ukai 1 1/8.
what size spokes do i need.

winnit93:

--- Quote from: Minihaha on August 01, 2006, 10:35 PM ---I know the ERD (effective rim diameter) . . . I need the following ??


* Hub flange diameters
* Hub centre to flange measurements on each hub (centre to R/H flange and centre to L/H flange)
Cheers

Steve  :daumenhoch:

--- End quote ---


right steve

its the hub centre to flange measurement that confuses me,am i right in thinkin i measure frome the gt sticker in the middle of the hub to the edge of the flange.
thanks
scotty

Steve P:
Cheers . . . not sure where my 1st reply disappeared too  ???

Yeah . . . that's it . . . measure the distance from the centre of the hub across to the centre of each hub flange

Are they 36 hole Ukai you're using too

Steve

winnit93:
ye 36 hole

front flange diameter 480mm

rear flange diameter 550mm

from centre to flange front hub 350mm

from centre to flange rear hub 330mm

hope this all makes sence

Steve P:

--- Quote from: winnit93 on August 01, 2006, 11:09 PM ---ye 36 hole

front flange diameter 480mm

rear flange diameter 550mm

from centre to flange front hub 350mm

from centre to flange rear hub 330mm

hope this all makes sence

--- End quote ---

WOW . . . them hubs are huge Scott  ;D

Should be:

front flange diameter 48mm

rear flange diameter 55mm

from centre to flange front hub 35mm

from centre to flange rear hub 33mm

Two secs . . . I'll check it out for you  :daumenhoch:

Navigation

[0] Message Index

[#] Next page