Technical & Reference Section > Tech and Restoration

Oxy Bath.

(1/3) > >>

Retrodan72:
What's involved, and how do you do it?

Any advice guys? ???

martin46:
You can buy small tubs on Ebay and you'll need an old baby bath or a builders/plasterers mixing bath, or maybe even a paddling pool will do. You'll have to experiment with mix ratios, start weak and add more oxy as required. once you have it right, a 12 hour soak should be enough to shift the rust. Then just rinse and polish  :daumenhoch:

BMX1973:
I use a wheelie bin. Half a bottle of oxy crystals. Leave for about 12 hours. Dont leave in too long if the chrome is thin.  :daumenhoch:

martin46:
http://www.ebay.co.uk/itm/500g-Oxalic-Acid-Very-High-Purity-Hull-Deck-GRP-Cleaner-Rust-Remover-/161053117754?pt=UK_BOI_Medical_Lab_Equipment_Lab_Supplies_ET&hash=item257f838d3a

BENDYCAT ELEVENTEEN:
fill up some big bottle with water a place then in the tub - this will lower the volume of water and mix, so you can use less mix and still fill the tub  ;)

Navigation

[0] Message Index

[#] Next page