Author Topic: Birmingham Wheels Frame - Reynolds bars (Read 19204 times)

dinglem · « **Reply #100 on:** June 03, 2014, 01:09 PM »

Yeah, I'm well happy

I jumped at it when Spence said he was considering selling, and he was even kind enough to deliver it himself. Top man.

Having two means I can build a conservative one using the original padset and decals colours, and then be a little more adventurous with the other one. That original padset I have was limiting my options a little (basically meaning black components) as I just had to use it! Build number 2 will be based around the WHEELS bike I once rode around the WHEELS track BITD

Mikku · « **Reply #101 on:** June 03, 2014, 03:30 PM »

Subscribed!

jp-rebel · « **Reply #102 on:** June 05, 2014, 01:56 PM »

Fantastic to see 2 of these frame sets get the treatment they deserve,here is a updated pic of mine,you have an old pic on the first page of this thread (13th down) since it was taken the Bars,Seat,Seatclamp,Stem,Pads & Brake Set have changed.

dinglem · « **Reply #103 on:** June 05, 2014, 02:57 PM »

Retrodan72 · « **Reply #104 on:** June 07, 2014, 10:43 AM »

That's a lovely looking bike, the gold bits and that padset look mint.

Mikku · « **Reply #105 on:** June 08, 2014, 01:46 AM »

Quote from: jp-rebel on June 05, 2014, 01:56 PM

That is flippin' gorgeous!!

dinglem · « **Reply #106 on:** June 10, 2014, 05:29 PM »

Here's a better shot of the original 80's decal set that came with my second frame, complete with Dutch dealer logo.

[ Attachment: You are not allowed to view attachments ]

Jaan · « **Reply #107 on:** June 10, 2014, 08:04 PM »

This build is going to be pretty spectacular.

What stem and bars are you fitting?

I love skinnys on a Pro build

dinglem · « **Reply #108 on:** June 10, 2014, 08:44 PM »

That's a very good question mate. I was going to go against the grain a little and fit a set of 8inch rise Vector V-bars (so no stem) to keep it lightweight, as I absolutely love them (although I know others don't). I have had a set restored and re-chromed, but following a trial build I have discovered that they are very slightly too narrow to take the original WHEELS bar pad I have. Small factor, but I really want to use the original padset on the chrome bike, so I am now going for a set of NOS GT Santa Ana race bars instead. The bike originally came with a black Suntour stem so to retain a bit of history from the original build I will stick with that I think.

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

The Vector V-bars will go onto the second WHEELS build as I will be getting a repro padset made for that so will get a reduced width bar pad made. It's all on hold again for the time being unfortunately as I'm currently back en route to work again

Jaan · « **Reply #109 on:** June 10, 2014, 10:28 PM »

I had the same problem with Vector standard bars, you end up with 2 redundant pads, Vector Pro bars would solve the crossbar issue. The issue I found with the Vector bars is the fixed rake which looks good or bad depending on top tube length and head tube angle, they worked well on a Vector Mark 2 but it is a bit of a lottery...

GT bars are always a great plan B.

dinglem · « **Reply #110 on:** June 10, 2014, 10:43 PM »

The Vectors do look ok actually as you say, the geometry seems to suit them. I love how they look! I'm limited by the other parts I have gone for on the first bike but can mess about with the second one a bit. I think I will need a layback to go with those Vector bars really.

I had those GT bars earmarked for my NP build, so I'm on the look out for something else unusual for that now!! Never ending! Ha!

dinglem · « **Reply #111 on:** June 10, 2014, 11:28 PM »

There's no way I was missing out on using these pads - just the one looks awesome, let alone all three

As can be seen on the jp-rebel bike above.

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

markyp · « **Reply #112 on:** June 11, 2014, 05:29 PM »

now that's a frameset that I would come out of retirement for

dinglem · « **Reply #113 on:** August 09, 2014, 09:11 AM »

As well as starting to look at the blue Natty Pro I also started a dry build on this

[ Attachment: You are not allowed to view attachments ]

dinglem · « **Reply #114 on:** August 09, 2014, 09:12 AM »

Hubs look awesome!!!

[ Attachment: You are not allowed to view attachments ]

Retrodan72 · « **Reply #115 on:** August 09, 2014, 09:40 AM »

I've been looking forward to this Mart, looks mint.

The hubs are class mate.

oldskoolbmx · « **Reply #116 on:** August 09, 2014, 08:25 PM »

Nice clean example

dinglem · « **Reply #117 on:** August 10, 2014, 12:11 AM »

Quote from: Retrodan72 on August 09, 2014, 09:40 AM

I've been looking forward to this Mart, looks mint.

The hubs are class mate.

Still a way to go yet, but the dry build has gone well

I dragged it over to the house this evening for a few pics.

Still got to sort the brake lever, fit a freewheel and then the chain, as well as the rear brake itself.

The ROE Whale Tail setup works ok as it actually sits on the looptail without the need for any drilling for the usual pin (which i wasn't intending doing anyway...) so overall i'm pretty chuffed with it so far

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

dinglem · « **Reply #118 on:** August 10, 2014, 12:16 AM »

Few more pics.... Jensen approved i think... Looking more like a bike now

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

Mat · « **Reply #119 on:** August 10, 2014, 12:37 AM »

Bike looks flimsy (nice though) the beast looks sturdy.
Top beast.

willo73 · « **Reply #120 on:** August 10, 2014, 09:06 AM »

Looks absolutely stunning Martin, love it

dinglem · « **Reply #121 on:** August 10, 2014, 09:07 AM »

The skinnies certainly do make it look very lightweight, just like the team WHEELS race bikes from BITD, which is the look I was trying to replicate, as pictured earlier in the thread. I love the way they make it look fast!

Jensen (the beast) makes everything look a bit flimsy!!

NORTY40 · « **Reply #122 on:** August 10, 2014, 11:07 AM »

That looks stunning Mart , great build mate

It looks great on the skinnies and those hubs are just awesome

snoopy72 · « **Reply #123 on:** August 10, 2014, 11:20 AM »

Martin those skinnies look fantastic on there !!!!!! even though i'm more partial to the slightly wider wheel

dinglem · « **Reply #124 on:** August 10, 2014, 12:22 PM »

Quote from: snoopy72 on August 10, 2014, 11:20 AM

Martin those skinnies look fantastic on there !!!!!! even though i'm more partial to the slightly wider wheel

Yeah, I think them being black really sets them off and visually bulks them up a bit. Love 'em! Pretty much as I found it and true to the original team bikes