Technical & Reference Section > Tech and Restoration

Bendix 76 coaster

(1/1)

Munnyella:
Hi Guys

Picked up a Bendix coaster the other week, which I've stripped, cleaned and re built, works a treat, my problem is the cog, its a 19t, and I don't want to run a 198t front, so I ordered a sturmey archer 13t, but its too small to fit, as is the shimano 16t and 17t I have in the bits box.

Has anyone found a supplier of bendix fitment cogs, I can find nowt!!

Cheers

MM

oldtired:
i think Suntour ones fit bendix or they made them for bendix?  if that helps ,
 

have you tried the low rider shops, coasters is popular in da hood  :daumenhoch:


method # 1 from bitd, and a last resort munners, is to open out one of the others and weld it on ,   stops the lugs stripping off,   which they will,    :daumenhoch: 

method # 2 from bitd involves buying a new wheel and a brake  :daumenhoch:    :LolLolLolLol:


spied this too

http://www.ebay.co.uk/itm/like/181298236021?hlpht=true&ops=true&viphx=1&lpid=95&device=c&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=95&ff19=0

think i may have some old 16 t ones , the lugs will be shot though, i'll have a look (helpfull as always  ;D)

sure i have a 3 lug drive screw too so you could use that to weld one up save the og one :daumenhoch:

vestanpance:
eBay USA, like the link above. They were fitted to loads of us stuff. :daumenhoch:

Munnyella:

--- Quote from: oldtired on January 30, 2014, 06:24 PM ---i think Suntour ones fit bendix or they made them for bendix?  if that helps ,
 

have you tried the low rider shops, coasters is popular in da hood  :daumenhoch:


method # 1 from bitd, and a last resort munners, is to open out one of the others and weld it on ,   stops the lugs stripping off,   which they will,    :daumenhoch: 

method # 2 from bitd involves buying a new wheel and a brake  :daumenhoch:    :LolLolLolLol:


spied this too

http://www.ebay.co.uk/itm/like/181298236021?hlpht=true&ops=true&viphx=1&lpid=95&device=c&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=95&ff19=0

think i may have some old 16 t ones , the lugs will be shot though, i'll have a look (helpfull as always  ;D)

sure i have a 3 lug drive screw too so you could use that to weld one up save the og one :daumenhoch:

--- End quote ---

I'd be very needsome of a 3 lug drive screw Jimlad, particularly if its a suntour jobby, been after one of them for those heavy wheels you looked at on Saturday, so I can make them proper coaster, not the heavy ACS shit!! have a dig for me handsome!!! if you have one, i'm keeping them!!

Navigation

[0] Message Index