Technical & Reference Section > Tech and Restoration

'Shiny-siding' anno rims

(1/4) > >>

ED209:
whats the best way  :) ?

oldschoolace:
240 grit brake pads would do it  ;)

bobbbbsy:
zinc oxide paper from wilko ed..

MartyC:
Use 240 Grit with a sanding block, followed by 600 grit, 1200 grit depending on the level of finish you are after you may need to go to 1600 grit and 2000 grit folllowed by Peek or Autosol (depending on your preference).

Spen69:
Ed I use a detail sander with 240 grit to start and got bored after 600 grit so polished them on the polishing wheel :2funny:

If it's a show pony then follow Marty's guide :daumenhoch:

Navigation

[0] Message Index

[#] Next page