Technical & Reference Section > Tech and Restoration

Peregrine 48's

(1/2) > >>

McQUEEN:
Just had some rims back from the anodisers - they were originally laced to a set of peregrine / suzue 48 hole hubs on what I remember was laced either 3 over 1 or 4 over 1. I took some photos on my mobile before I stripped them down and subsequently lost the phone and the photo's! :uglystupid2:

I have to drop them to a great little bike shop tomorrow with one of the original spokes so they can get relaced. Will he be able to work out how to relace them?

ED209:

--- Quote from: McQUEEN on July 25, 2014, 07:14 AM ---Just had some rims back from the anodisers - they were originally laced to a set of peregrine / suzue 48 hole hubs on what I remember was laced either 3 over 1 or 4 over 1. I took some photos on my mobile before I stripped them down and subsequently lost the phone and the photo's! :uglystupid2:

I have to drop them to a great little bike shop tomorrow with one of the original spokes so they can get relaced. Will he be able to work out how to relace them?

--- End quote ---

you'd be surprised just how easy it is to do yourself :-)

and its probably a 4x build ... over 3 and under 1 ( so crossing 4 )

McQUEEN:
you'd be surprised just how easy it is to do yourself :-)

and its probably a 4x build ... over 3 and under 1 ( so crossing 4 )
[/quote]

thanks, sounds as easy as a rubiks cube!

ED209:
dig out a 'how to' and have a go :-)

just look for a 48 spoke 4x wheel build... gotta try it once :-)

Discostu:
How long are the spokes?  You can tell by the length.  :daumenhoch:

Navigation

[0] Message Index

[#] Next page