Technical & Reference Section > Tech and Restoration

Good Tut on removing crank from bmx.

(1/3) > >>

Immortal:
Hey guys, im stripping my bike to respray it, im okay with removing basicly everything but does anyone know a decent tut on removing the crank?

thanks alot for your help:)

peace, Nick

RATTY:
What type of crank mate? 1 piece or 3 piece

dj_benice:
crank extractors are the way forward no messin wit 3pc :)  Put a request up in tech n restoration if you cannot find a tutorial sure someone will help :)

Immortal:

--- Quote from: ratty on August 23, 2006, 09:00 PM ---What type of crank mate? 1 piece or 3 piece

--- End quote ---

Its a 1 piece mate, cheers, Nick

Sanmarcopizza:
Take the non drive pedal off (thread turns clockwise that side). Remove lock nut and cone nut at the bottom bracket, again, I think they turn clockwise. Pull the arm through the bottom bracket. You may find it best to pull the non drive side bearing out to give you more clearance. If you need to remove the bearing cups, just bash them out with a hammer and drift.

Navigation

[0] Message Index

[#] Next page