Technical & Reference Section > Tech and Restoration

Crank set help

<< < (2/3) > >>

stupops:
mavic rims
halo spokes
halo clickster freewheel
thickslick tyers
se slayer hubs
avid speed 7 calipers and levers
DMR flat mag pedals
Richy seatpost
ODI lock on grips

it looks like fab (to me anyway) and rides lovely. although replacing cranks a bb is a right job. i fear i am just spending money for no good reason!!!

pickle:
only two things wrong with that.

1. The seat angle is a bit wrong

2. THOSE BARS!  they need to be inline with the forks, it's not an old school bike with shyte geometry  :daumenhoch:

Devilock:
I concur with Rob.

If you need the bars in that position to ride comfortably then you have the wrong size frame.

MartyC:

--- Quote from: Devilock on February 02, 2015, 08:12 AM ---I concur with Rob.

If you need the bars in that position to ride comfortably then you have the wrong size frame.

--- End quote ---

Or the seat too far forward...

Just needs a little fettling and fitting and will look cool  :daumenhoch:

58 delray:
has that not got a Euro bb anyway ?

Navigation

[0] Message Index

[#] Next page

[*] Previous page