Technical & Reference Section > Tech and Restoration

Early 90s quadangle build progress made today 04/07

<< < (3/5) > >>

VOIVOD:
 :) If it is a 1 inch threadless,there are still plenty of newschool 1 inch aheadsets available.

oldtired:
3/8th dropouts solves a few problems :daumenhoch: ,    ;D
 

is the front one of the oddball crossover ones,   1 1/8"  headtube with 1" threadless forks then?    if it is then a 1" threadless headset may have cups that are to small :-\

accurate measurements in mm will solve this , internal headtube , external forks...... ;)     


 :LolLolLolLol:   gota love mid school
 

 

threaders:
Hi. Thanks for all the comments and advice it's really appreciated. I have taken these pics which I hope will help here are the forks:)

And here is the head tube

So are there three sizes of stem then , old school, mid and new? I get confused when I look on eBay as some say 1inch, or 1 1/8 or 28.6  :-\ what are people's thoughts on using a layback post on this?
Cheers, Jonathan  :daumenhoch:

poorboyee:

--- Quote from: threaders on March 31, 2017, 02:09 PM ---Hi. Thanks for all the comments and advice it's really appreciated. I have taken these pics which I hope will help here are the forks:)

And here is the head tube

So are there three sizes of stem then , old school, mid and new? I get confused when I look on eBay as some say 1inch, or 1 1/8 or 28.6  :-\ what are people's thoughts on using a layback post on this?
Cheers, Jonathan  :daumenhoch:


--- End quote ---
the forks look to be 1.1/8, so nothing to worry about there and ive just checked my old 1.1/8 standard "shorty" head tube! its the same as your quadangles so your the father of a....healthy 7lbs 1.1/8 quadangle f/f :coolsmiley: :coolsmiley: :coolsmiley: :coolsmiley:

threaders:
Cool, so I need a 1 1/8 thread less stem and a 1 1/8 thread less headset then ?  :-\ thanks for checking the measurements  :daumenhoch:

Navigation

[0] Message Index

[#] Next page

[*] Previous page