Technical & Reference Section > Tech and Restoration

Hutch Trickstar brake issues

<< < (2/4) > >>

Quadog:
I could give it a go it does seem very close to brake im stripping down over weekend just hope I can put it back together again 

hotdog:
Would an MX1000 the right way up reach the rim? I use an 880 on mine but mine's an '84 U.S. made frame. My brake bridge sits just slightly inside the seat stays.
[ Attachment: You are not allowed to view attachments ]

Quadog:
it quite possibly could but the wheel has to sit further forward then the freewheel hits the frame I might try putting more spacers on the hubs see if that works your brake bridge does look as high as mine but is  fitted different

tfi_friday:
I've a Jap one but looks completely different to that one. I've a much bigger space between the end of the platform and the top of the brake mount.
Your brake mount looks like it has been mounted above the seat stays rather than brtweeen them.

I've Nippons on mine and there's still plenty of room left.

brettypeeps:
I run an 880 on the back of mine with no problems




Sent from my iPhone using Tapatalk

Navigation

[0] Message Index

[#] Next page

[*] Previous page