Technical & Reference Section > Tech and Restoration

gyro

(1/1)

adeshere:
We'll i have just bought a NOS upper gyro cable from alansbmx as i can't find a new type that is long enough.

First i noticed that the balls on this cable are larger and then noticed that the thread is smaller.

I had an old gyro cable so thought i'd try and melt the ball off with a blow torch and then see if i could then melt it back on using a mould ,ok dent in a block of wood. I have always wanted to try this ...dont !! it doesnt work.

So, does anyone have a spare old type gyro top plate ?

lazychubs:
you should be able to change the screw in adjusters mate
as i did that on me master
have they got a slot cut in em
if so take nut off then swap em over
plus it should have come with spare adjusters

adeshere:
The new gyro cables come with the different ends and are slotted.

The original 80's cables are a smaller thread and are not slotted.

I could not get a red long upper cable so i had to geta white 80's gyro cable.



If someone had a spare top bracket off of a old gyro i could use that.  Otherwise, i will have to cut them off

Navigation

[0] Message Index