Technical & Reference Section > Tech and Restoration

Craig Campbell Prolite

<< < (10/15) > >>

benno:
Cheers guys , ok then blue MX 1000’s or 880’s ??
I quite fancy the 880’s for a change 😀👍🏼

Jase:
I’m just about to put some 880s on the current build I’m doing because I fancied a change. Just need to decide whether to go polished or white🤔

Quadog:
I think you should ditch the blue 880s they’re rubbish

(Wanted blue 880s) 😳

benno:

--- Quote from: Quadog on March 06, 2018, 02:26 PM ---I think you should ditch the blue 880s they’re rubbish

(Wanted blue 880s) 😳

--- End quote ---
😂😂😂

benno:
Time for a little update , I bought these lovely coaster tuffs from Brett last year, they were always bought with this build in mind .
As you can see they are in dire need of a good clean up and a good bit of sunbathing smothered in peroxide .
First step today was to strip all the axles and hubs out and give the wheels an initial clean, they had some round sticky marks at the base of each spoke which came off easy with a bit of acetone.
I then gave em a spray over with some degreaser and got a toothbrush to scrub in behind the hubs etc.
The next step will be to stanley blade round the rims to remove the brake rub and give em a proper scrub with some jif  before running em through the dishwasher a couple of times . Hopefully that’ll get them good enough to peroxide as long as we get some sun that is 👍🏼
Here’s a few pics

Navigation

[0] Message Index

[#] Next page

[*] Previous page