Technical & Reference Section > Tech and Restoration

Bob Reedy/Ace.co. pedal cage build ***Finito***

(1/6) > >>

oldschoolace:
Some of you will remember i picked up a set of Nos Bob reedy pro pedals a while back.  :daumenhoch:








They have sat in the box unloved for a good while - until today!
I decided it was time i got round to having a go at some Demco stylee pedal cages for them  :)
With the Ali already ordered ages ago i sketched a few cage designs and once happy set about taking some accurate measurements with my digital calipers
(you should all have a set by now  ;) )
Next i transfered my design to the ali after covering it in making tape

oldschoolace:
 Made a dinky jig to hold the ali against. This also serves as a hand guide to keep the holes in line  :daumenhoch:

oldschoolace:
The hole left in the Mdf underneath made for a handy indexing point to line up the next hole. A quick tap on the drawings confirms all was correct and the teeth of the cages were done.
Tomorrow im hoping to get the bodies drilled out and the cages cut into their seperate sections  :)

Jaymz:
Nice

CustardLips:
Them bodies are well cool... looking forward seeing the cages.  :daumenhoch:

Navigation

[0] Message Index

[#] Next page