Technical & Reference Section > Tech and Restoration

Does anyone know the bolt sizes to make up the hardware for flights?

(1/1)

mark j:
I had a hardware store try it all out on a 401 flight crank a while ago a write it all out. And I've lost the paper. Does anyone know all the bits and bobs and is it all unc and can just be measured with a tape measure and some common sense? Please help!
thanks
mark

stidds:
Go to www.customriders.com they stock flight crank spares i.e. washers, dome bolts, pinch bolts etc.  Cheap too.

mark j:
Thanks Sean, From what I've worked out so far.....

Pinch bolts - 1/4 x 1/2 unc socket bolt
Arm retain - 3/8 x 3/4 unc button bolt
Chainring retain - 5/16 x 1/2 unc button bolt

And to replace stem bolts on a Hutch 5/16 x 1"

Went to a local hardware place yesterday and for 4 stainless bolts for the hutch stem was................£36!

Navigation

[0] Message Index