Technical & Reference Section > Tech and Restoration

polishing question

<< < (2/2)

dordymush:
just go down the grades greg.
i start at 400 and go down to 1200.
then a bit of autosol.
then t,cut
then autoglym.
by that time your arms should be falling off.
but you'll have a nice shiny set of rims.

Jazzchimp:
use a polishing wheel  :daumenhoch:

FuNMoNsTeR:
you need to wet n dry Through staged papers down to 1500/2000 grit paper.... then take some used 2000 grti and do it again.... then cream polish.
 Polishing is just scratching a surface to a finer and finer degree ;)

Navigation

[0] Message Index

[*] Previous page