Technical & Reference Section > Tech and Restoration

Leary Turbo Crank Spindle?

(1/3) > >>

FuNMoNsTeR:
I had this spindle arrive this morning. It was advertised as a Turbo Lite Spindle but the seller says they removed it from a double tubed set of DB cranks, which leads me to believe it is for a Leary Turbo or Early Redline crank. Is this for open bearings? as i can see no mounts for sealed units...... Thanks Guys  :)

Jazzchimp:
guess the spindle!

loose ball defo as for the turbo bit... not sure

FuNMoNsTeR:
I think its the large size. It measures 12mm or 1/2 and inch square on the narrowest end of the taper.

GREMLIN:
Andy ask bmx-796 about the spindle he has on his turbo. From the looks of his pics he's running a loose ball bottom bracket with his turbo crank set  :daumenhoch:

dj_benice:
from memory the early 400 flights (sugino) and DB three pieces all had the same square tapered spindle ;)


All the sugino spindles are pictured here http://www.radbmx.co.uk/forum/index.php'topic=26518.0;topicseen

Navigation

[0] Message Index

[#] Next page