Technical & Reference Section > Tech and Restoration

Somebody please help - back wheel making a clicking noise

<< < (5/6) > >>

oberonspacefruit:
i have never failed to get any freewheel off, by gripping it in a vice, till it stopps turning, then using the wheel for leverage.


fooks the freewheel, but not the hub.

burnaliser:
Is it a sealed suntour hub?  There is someone on the burner forum who can get the replacement bearings for those.

Check out this thread, very useful:
http://www.raleighburner.com/phpBB2/viewtopic.php't=5284&highlight=suntour+sealed+hub+restoration

jimwise68:

--- Quote from: burnaliser on April 13, 2007, 11:49 AM ---Is it a sealed suntour hub?  There is someone on the burner forum who can get the replacement bearings for those.

Check out this thread, very useful:
http://www.raleighburner.com/phpBB2/viewtopic.php't=5284&highlight=suntour+sealed+hub+restoration

--- End quote ---

Robin it is a SR sealed hub.

I'll find out the spec of it.

burnaliser:
Not so sure then, the guy who gets the suntour bearings might still be able to help you find what you need though.

Funnily enough I have this exact same problem on my aero pro rear wheel :(

snav69:
Jim , If its the bearings and you are struggling to find replacements , give me the bearing numbers and i will nip here
http://www.abexpower.co.uk/

I go here for my bearings when i replace them in the motorbikes and quad and they are pretty cheap  :daumenhoch:

 :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page