Technical & Reference Section > Tech and Restoration
Redline Proline II
gt0733:
jeez luise, check the print on that ad Ron :2funny: and that carrera promo would have been done at least 3 months before to allow for publishing times.
by the way, i have the same test and you'll find it is BMX Plus magazine not BMX action ;)
GREMLIN:
Had another day of goodies turning up on my doormat. So what did i think i'd do when it's such a lovely day outside?
Yup, hide away in the spare room with my toys and get busy :D
First of all i tucked into my package from Steve (vinoah,s ark). Thanx very much m8 :daumenhoch:. Which had a stamped Redline, chromoly, fluted seatpost, a Dia compe Mx1000 calliper in blk, a Dia compe pre bent lever in blk, and a suntour arrow seatpost clamp in it.
Which is all good and i'm well happy :smitten: .
Second pack contained my 2 sets of Redline Proline decals from the States. Looked at them, thought well nice and was happy for a bit. :)
I started applying the smaller decals first. Then moved onto the larger ones (still cool). Finally got to the downtube decals... The bloody things are about 3" too long (now i'm not impressed).! >:(
So, 1 sh1tty e:mail to the States later, i'm sat here thinking "i can sort this". So out comes the ruler and craft knife. A bit of fumbling later...kinda happy again. I can just about make out the join, but it'll do for now. ;)
It's getting there...
Before...
After...
Other side...
Decal join...
Rear end...
Another shot of the seat tube gusset...
Parts from Steve ;)...
And finally the decal sets :knuppel2:...
Image intensive i know. But i love taking pics ;) G.
zed4130:
its looking amazing mate, i cant wait to see it all done , is it going to mk :daumenhoch:
GREMLIN:
It may well come along to M.k m8. Won't be finished tho. :LolLolLolLol:
I'm at the stage now where i'm going to be up against plenty of people to get hold of the finishing bits. The elusive parts time of the build, or costly.
A pair of Redline Str v-bars/pro bars... Tuf neck/Pro neck stem (polished)... Black Kashimax Aero. Oh and a Redline black/grey/red top tube pad. I'm not interested in a stem pad (don't want to hide my mirror finish stem). I prefer my v-bars not to have a pad on either (looks less weighty). Hope it'll be easier to pick up a single top tube pads too.
So basically i'm 4 parts away from completing it. :daumenhoch: G.
zed4130:
--- Quote from: Gremlin on July 11, 2007, 05:41 PM ---It may well come along to M.k m8. Won't be finished tho. :LolLolLolLol:
I'm at the stage now where i'm going to be up against plenty of people to get hold of the finishing bits. The elusive parts time of the build, or costly.
A pair of Redline Str v-bars/pro bars... Tuf neck/Pro neck stem (polished)... Black Kashimax Aero. Oh and a Redline black/grey/red top tube pad. I'm not interested in a stem pad (don't want to hide my mirror finish stem). I prefer my v-bars not to have a pad on either (looks less weighty). Hope it'll be easier to pick up a single top tube pads too.
So basically i'm 4 parts away from completing it. :daumenhoch: G.
--- End quote ---
:daumenhoch: all sounds good mate :daumenhoch:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version