Technical & Reference Section > Tech and Restoration

Prizing Seat Post Clamps Apart……..

<< < (2/2)

brass monkey!:
thanks guys, i'll try those out........ ;)

Dingobmxer:
take the bolt right out, thread it in from the otherside (outside) place a thin peice of steel in the gap and as the bolt goes through it will push against the steel therefore pushing the clamp apart AND you can regulated the force used by how tight you screw in the bolt, works with clamp on stems too  :daumenhoch:

 :) DINGO :)

pickle:
Genious!!   :daumenhoch:

highrisedrifter:

--- Quote from: Dingobmxer on August 01, 2007, 12:29 PM ---take the bolt right out, thread it in from the otherside (outside) place a thin peice of steel in the gap and as the bolt goes through it will push against the steel therefore pushing the clamp apart AND you can regulated the force used by how tight you screw in the bolt, works with clamp on stems too  :daumenhoch:

 :) DINGO :)

--- End quote ---

That's a cracking idea, mate.  :daumenhoch:

Thanks for that.

HRD

Navigation

[0] Message Index

[*] Previous page