Technical & Reference Section > Tech and Restoration

Attn Haro Gurus, advice needed on Group 1....

(1/3) > >>

Weeksy:
Hi dudes,

What's the difference between the Group1 RS1 's 2's and 3's?

I thought the 1's had the longer toptubes, but I could be wrong!

Could you please advise?!

Thanks

Weeksy

kdw712:
check out alans OS sections he has rs1 & 2's for sale
gotta be a good place to start  :daumenhoch:


http://www.alansbmx.com/index.php?cPath=116_86

Weeksy:
Hi fella,

I've been looking on there, but he describes them as the same as each other without AD brake mounts, however neither of them do, so would like the differences confirmed!

Thanks

Weeksy   

double chevron:
Fro what I remember from BITD mags, the Group1 RS1 was designed for Pistol Pete (so a bit longer and diff. headtube angle)
while the RS2 what Mike King bike (smaller guy!)
Both were full Cro-Mo, while the RS3 was "Trimoly", 3 tubes Cr-Mo

My 86 RS1 has a 19"  top tube, don't have no RS2 right now to check  ::)

The full range was with calipers for the first year, 1986.
Then the 87 RS1 had 990 mounts, while the others stayed with calipers.

They had altough different colors schemes.... check the catalogs mate! too long to explain....  ;)

chris miller:
haro group1 rs 1  only came as a frame fork set back in the (80,s) black blue crome
haro group1 rs 2  came as a completed bike red white crome 1 pice crank 175mm if you need sizes
of an old rs2 let me no trying to get mine back from the dead at mo

Navigation

[0] Message Index

[#] Next page