Technical & Reference Section > Tech and Restoration

freecoaster problem

(1/2) > >>

harris:
im running a couple of geisha hubs,one normal and one solid axle bruce crisman
i just adjusted the slack on the solid axle one and affixed it,now it slips and sometimes re engages
why would this happen its not a normal cassette is it. 

lazychubs:
have the washers gone on ok as mine didnt and axle kept moving from side to side
and had shiat loads of slack

harris:
yes all the washers are fine
it works for a few pedals then nothing ,no drive  ,then it catches again for a while   :tickedoff:

subversion:
http://www.free-coaster.com/html/maintenance.html

This may help...?

BrianP:
I'd a LOT of trouble with an old ody freecoaster a while back that kept slipping Dan.
Turned out I'd greased it so much that the grease was preventing the clutch from getting any friction against the internals to engage.
Any chance something similar is happening here?

Bp.

Navigation

[0] Message Index

[#] Next page