Technical & Reference Section > Tech and Restoration

Help! i can't get my pedals off!!!

<< < (2/5) > >>

ORB:
after applying derv, strip the pedal so you just have the shaft left exposed.

Grip the shaft TIGHTLY in a vice and then rotate the crank.

Peasy lemon easy squeezy

billstup:
Like lazychubs said make sure you are turning them the right way, one pedal is left handed thread and one is right handed thread  :idiot2: :idiot2:

NICKYSPLENDID:
been to the garage...bought derv. the pedals are soaking in derv as we speak.

i'll give it a go tomorrow...tonite i'll clean the mags..

weston:
bang the end of the pedal with a hammer to loosen any rust in the shaft, then you will have to use a bike shop spanner which is 5 times longer than your normal spanner for leverage, dont forget the right hand turns anti & the left clockwise when loosening.

theRuler:
the left hand pedal is opposite thread. the right is regular.

no pedal can argue with a big spanner and a knockometer

i'd eat my own c0ck before i found a pedal i couldnt undo  :D

Navigation

[0] Message Index

[#] Next page

[*] Previous page