Technical & Reference Section > Tech and Restoration

Pro Neck question

(1/2) > >>

electro808:
I've restored a few Tuf Necks but I've just bought a Pro Neck which I plan to strip and polish.  The great thing about Tuf Necks is the fact that, by undoing the large bolt, you can remove the quill which makes the stem really easy to polish.  I (carefully) tried to loosen the bolt on the Pro Neck so I could remove the quill but it is rock solid.  Is it possible to loosen that bolt on a pro Neck or is it fixed and just there for show?

sawzall:
i have taken them off before,but i had to use a windy gun on it as it was tight as fook ;)

Steve P:
The Pro Neck is built exactly like the Tuf Neck ... I've restored two now and both main bolts came out easily

Try clamping an old seat post or bars in the stem to undo the main bolt ... use heat on the quill if required too  :daumenhoch:

Steve

lazychubs:
yep mine come undone inc a helix one and copy one

DR VINOAH:
steve is this the same bolt i cracked racing OS :angel:

Navigation

[0] Message Index

[#] Next page