Technical & Reference Section > Tech and Restoration

Aerosol bike respray - show ur pics

<< < (19/20) > >>

bobafett:
That Haro looks sweet spen  :daumenhoch:

Did he finish off with a clear laquer to give it a shine or is that just the final white topcoat ?

darren34:
just sprayed this today




wirewheel:
thats expertise there friend spraying a quad. lots of tricky bits looks cool man well in. :daumenhoch:

mamadirt:
Couple of little tips which may be useful re: paint compatibility . . .

I've rattle-canned a few frames over the years and found Halfords/Holts car paint to be the best although as mentioned above it does tend to mark easily.  Plastikote gives a lovely finish but is pretty soft until cured so needs to be left a good couple of weeks before building.  I've found Hammerite pretty similar to Plastikote but having used it on mtb sus forks I found it was affected by grease and oil (paint became very soft) - a compatible lacquer over the top would probably prevent that.  Lastly, I found out the hard way this week that Plastikote and Halfords spray are not compatible  :'(.  Flatted the white powder coat on my newly acquired Dirt Bike frame and gave a couple of coats of pink Plastikote before overspraying with Halfords Volkswagen orange (the intention being to recreate the hot rod orange my mtb).  Test patch inside the dropouts was fine but when I came to do the full frame, cue a rather wrinkly paint finish  >:(  Anyway, thanks to the snow and a couple of days off work (I work in a school - health and safety is great), out came the wet and dry again and a couple of coats later it's looking pretty good - ready for lacquer this weekend then an exercise in extreme patience before it's built up.

Edit:  Another quick tip - check your lacquer is compatible with your decals before spraying  :-\  My headtube decal just decided to shrivel like a dried prune after the thinnest of coats - fortunately I was able to whip it off once it was touch dry, before the final coat.

That Quad looks fantastic - what a finish  :4_17_5:  Did you use Halfords spray? (I'm guessing so by the cans in the pic)

firebird4130:


This is my latest effort, S&M L.A.F, all done in one day, frame ,bars, chainring, and seatpost clamp. Paint is Rover applejack from halfords

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod
Powered by SMFPacks Rates (Facepunch) Mod