Technical & Reference Section > Tech and Restoration

pro class help *updated*again* now with pics

(1/10) > >>

djgivvinup:
Got this pro class f&f from HRD Racing last week, gave it a good clean & its come up nice. (can someone confirm it is a genuine pro class plz)
Only small problem with it is, the brake bridge is slightly bent inwards :idiot2:
not sure whether anything can be done about that? (any advice?) 
Also it came with no stickers on, but when you catch the chrome right in the light you can see it has had 'OP Racing' stickers on both sides of the down tube, anyone know what the heck OP Racing is? or anything about them?

The other thing i want advice on is the serial number, its: B3001846  am i right in assuming its a correct pro class serial & its Feb 1983?

Any help always appreciated  :daumenhoch:

sawzall:
a way to tell a pc is measure the down tube which should be 1 -1/4" and 1 -1/8" on the top tube as for the brake stay,try a bit of gentle persuasion with a small rubber mallet or a bit of wood,i have the action bike test if you want a photo copy ;)

jackel:
my old pro classes number was b3000665 if that helps

kdw712:
once you've confirmed the tube sizes match ok

then while its pretty much a bare F&F give it a weigh some how
and check the weights against any mag tests

i have a US spec supergoose and its identical in every way other than weight

also some tests on my scans page here

http://uk.geocities.com/kdw_712/scans.html

Frosty:
looks to be the ream Mcoy as the seat/chain stay loop is quite beefy too.

My serial is





here is the test too








Chrome looks very good to me too, ideal base for the smoke or decal up as is!

Paul

Navigation

[0] Message Index

[#] Next page