Technical & Reference Section > Tech and Restoration

Stripped screw, changings grips, and replacing chain HELP!

(1/2) > >>

humby_14:
The screw for my seat post clamp is so rediculously tight that I stripped the screw.  What do I do to get the screw out?

What is the best way to get your grips off on put new ones on so they will not move around on you?

I bought a new chain and want to take the old one off - the old one has a safety clip and the new one doesn't, just a little bolt.  Is this safe or normal? What's the easiest way to change a chain?

Thanks for all your help!!

Rombloke:
drill the allen bolt out of you seat clamp.

i always blow grips off of bars with my air line, but a thin screwdriver and some wd40 will work fine....or the best way...cut em off

you can get a link extractor from your local bike shop for a few quid, and they will also sell you a split link if you need it.

ok??

Dave

OrgasmDonor:
putting grips on, ye need to make sure the bars are completely grease free and i spray hairspray into the grips n just slide em on, next day grips are stuck tight and easy to get off, when need be, using rom blokes non airline method :daumenhoch:

Bob_Acid:
Who the fook has hair spray in their house?  :laugh:

kdw712:

--- Quote from: Bob_Acid on May 07, 2008, 01:11 PM ---Who the fook has hair spray in their house?  :laugh:

--- End quote ---

certainly not you Bob  :LolLolLolLol:   >:D


last time i fitted some grips i used a bit of lynx deordrant - it did a grand job and smelt nice for 3 days as well  ;D

Navigation

[0] Message Index

[#] Next page